Centrifugal Pumps | Pumps | Centrifugal Pumps | Farmer Bob's

FREE SHIPPING on orders over $200+

Centrifugal Pumps

Shop Our Huge Selection of Centrifugal Pumps made by the industry leaders like Hypro Pentair, Ace and other brands. These Centrifugal Pumps can be driven by Motor, Belt, Hydraulics, & PTO Shafts.

Showing 1 - 40 of 40

Compare Add to Cart

PTOC 150 Series 1" stub shaft, ACE Pump

ACE Pump

the high performance pump. 100 psi (6.9 bar) at 40 gpm (151 lpm) due to increased pulley ratio and larger 1-1/2" x 1-1/4" construction.Provides higher pressure and greater volume for applicatio…

MSRP:

Was:

Now: $1,099.95

PTOC-150-600-B
Add to Cart
Compare Add to Cart

Gas Engine Driven (Less Engine) Centrifugal Pump, Polypropylene Construction, Less Engine, 1" x 3/4"

ACE Pump

ace offers a complete line of gasoline engine driven centrifugal pumps. The pumps provide service where power sources are limited or unavailable. The pumps are ideally suited to develop pre…

MSRP:

Was:

Now: $263.95

GE-85-LE
Add to Cart
Compare Add to Cart

Ace Repair Kit For GE-860 & GE-1660 Centrifugal Pumps

ACE Pump

Ace repair kit for ge-860 & ge-1660 centrifugal pumps

MSRP:

Was:

Now: $153.95

RK-GE-860/1660
Add to Cart
Compare Add to Cart

Ace Magnetic Driven Centrifugal Pump 1.50" Suction x 1.25" Discharge

ACE Pump

Fits models: 3430 3440 3630 3640 4440 4640.Suction 1-1/2” - discharge 1-1/4”.Clockwise rotation when facing pulley end.Chemical resistant valox.3/4” diameter stainless steel shaft.St…

MSRP:

Was:

Now: $949.95

FMC-CW-150-MAG-DX3
Add to Cart
Compare Add to Cart

Ace Hydraulic Driven Centrifugal Pump Less Motor 1-1/4" Suction x 1" Discharge

ACE Pump

Features: port sizes: 1-1/4" fnpt suction, 1" fnpt discharge pump material: cast iron seal material: viton® carbon/ceramic (optional severe duty silicon carbide available) impeller material: &nbs…

MSRP:

Was:

Now: $726.95

FMC-HYD-LM
Add to Cart
Compare Add to Cart

Ace Hydraulic Driven Centrifugal Pump 1-1/2" Suction x 1.1/4" Discharge

ACE Pump

Ace cast iron hydraulic driven centrifugal pumpmodel #: fmc-150-hyd-206centrifugal pump design provides great resistance to abrasive solutions and extra flow for agitation. The advantages of the hydra…

MSRP:

Was:

Now: $975.95

FMC-150-HYD-206
Add to Cart
Compare Add to Cart

Ace Gas Driven Centrifugal Pump 2" NPT Suction x 1.50" NPT Discharge Less Engine

ACE Pump

This item is pump only less engine. Specifications of the ge-860 pump suction 2” discharge 1-1/2” maximum pressure 140 psi and maximum flow 140 gpm impeller a…

MSRP:

Was:

Now: $849.95

GE-860-LE
Add to Cart
Compare Add to Cart

Ace Pump Hydraulic Driven Centrifugal Pump 1.5" Inlet x 1.25" Outlet with Flange for Open Center Systems up to 16 GPM

ACE Pump

Ace pump hydraulic driven centrifugal pump 1.5" inlet x 1.25" outlet with flange for open center systems up to 16 gpm about the acefmc-150fs-hyd-206 fs model constructed of 316 stainless ste…

MSRP:

Was:

Now: $1,600.00

FMC-150FS-HYD-206
Add to Cart
Compare Add to Cart

Ace Hydraulic Driven Centrifugal Pump Seal Support Spacer S200

ACE Pump

Ace hydraulic driven centrifugal pump seal support spacer s200

MSRP:

Was:

Now: $8.95

S200
Add to Cart
Compare Please Give Us A Call (877)-287-0857

Ace Gas Driven Centrifugal Pump ( Less Engine ) 1-1/2" NPT Suction x 1-1/4" NPT Discharge

ACE Pump

Maximum pressure 115 psi (7.9 bar) and maximum flow 110 gpm (416 lpm).Thermoplastic impeller or attaches directly to 3/4” keyed shaft. This item is pump only less engine. Specifications of the…

MSRP:

Was:

Now: $429.95

GE-660-LE
Please Give Us A Call (877)-287-0857
Compare Please Give Us A Call (877)-287-0857

Ace Hydraulic Driven Centrifugal Pump w/ 206 Motor 1-1/4" Suction x 1" Discharge USA Made

ACE Pump

The 206 motor requires 7 gpm (26.5 lpm) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems. Recommended for: pressure compensating closed center systems load sensing cl…

MSRP:

Was:

Now: $899.95

FMC-HYD-206
Please Give Us A Call (877)-287-0857
Compare Add to Cart

Cast Iron Impeller For Ace Hydraulic Driven FMC Cast Iron Left Hand Thread -Series Centrifugal Pumps

ACE Pump

Cast iron impeller for ace hydraulic driven fmc cast iron left hand thread -series centrifugal pumps

MSRP:

Was:

Now: $189.95

BAC-26-CI
Add to Cart
Compare Add to Cart

ACE Pump Seal For 200L Series Hydraulic Motors

ACE Pump

Ace pump replacement repair seal cartridge for 200 series hydraulic motors.

MSRP:

Was:

Now: $46.41

BAC-75-200-TLS
Add to Cart
Compare Add to Cart

Ace Belt Driven Centrifugal Pump 20-Spline 1.25" Suction x 1" Discharge @ 65 GPM

ACE Pump

Ptoc-1000-20spsuction 1-1/4" female pipe threaddischarge 1" female pipe threadchemical resistant valox impellerstandard viton carbon/ceramic mechanical sealspring loaded idler absorbs shock of pto eng…

MSRP:

Was:

Now: $1,055.95

PTOC-1000-20SP
Add to Cart
Compare Add to Cart

Ace Belt Driven Centrifugal Pump 21-Spline 1.25" Suction x 1" Discharge @ 65 GPM

ACE Pump

Ptoc-1000-21spsuction 1-1/4" female pipe threaddischarge 1" female pipe threadchemical resistant valox impellerstandard viton carbon/ceramic mechanical sealspring loaded idler absorbs shock of pto eng…

MSRP:

Was:

Now: $899.95

PTOC-1000-21SP
Add to Cart
Compare Add to Cart

Ace Cast Iron PTO Belt Driven Centrifugal Pump 1.25" Suction x 1" Discharge

ACE Pump

Ptoc-600-qcsuction 1-1/4" female pipe thread.Discharge 1" female pipe thread.Chemical resistant valox impeller.Standard viton carbon/ceramic mechanical seal.Spring loaded idler absorbs shock of pto en…

MSRP:

Was:

Now: $979.95

PTOC-600-QC
Add to Cart
Compare Add to Cart

Ace Cast Iron PTO Belt Driven Centrifugal Pump 1-1/4" Suction x 1" Discharge

ACE Pump

Ptoc belt driven pumps are easy to operate and maintain. Belts can be replaced in the field with minimum downtime and at little cost. Maintenance features also include sealed ball bearings and a readi…

MSRP:

Was:

Now: $1,031.95

PTOC-600-6SP
Add to Cart
Compare Please Give Us A Call (877)-287-0857

Cast Iron Impeller For Ace Hydraulic Driven FMC-200-HYD-Series Centrifugal Pumps

ACE Pump

cast iron impeller for ace hydraulic driven fmc-200-hyd-series centrifugal pumps

MSRP:

Was:

Now: $189.95

BAC-26-200-CI
Please Give Us A Call (877)-287-0857
Compare Add to Cart

Gas Engine Driven (Less Engine) Centrifugal Pump, Polypropylene Construction, 70 psi (4.8 Bar), Less Engine, 1" x 3/4"

ACE Pump

ace offers a complete line of gasoline engine driven centrifugal pumps. The pumps provide service where power sources are limited or unavailable. The pumps are ideally suited to develo…

MSRP:

Was:

Now: $243.95

GE-75-LE
Add to Cart
Compare Add to Cart

Ace SS Hydraulic Driven Centrifugal Pump w/ Oasis 1.25" Suction x 1" Discharge

ACE Pump

ace stainless steel hydraulic driven centrifugal pump with oasis™ wetseal technology hydraulic driver centrifugal pump 1-1/4" x 1" discharge prevents run dry failures is…

MSRP:

Was:

Now: $1,199.95

FMCWS-125-HYD-204
Add to Cart
Compare Add to Cart

Ace Hydraulic Motor For Open & Closed Center Systems w/ Integral Needle Valve

ACE Pump

comes with seal support spacer, 2 couplers & motor boltsace pump hydraulic motor 7 gpm for open and closed center systems with integral needle valve.Used on ace tractor hydraulic system dr…

MSRP:

Was:

Now: $489.95

BAC-75-HYD-206
Add to Cart
Compare Add to Cart

Ace Hydraulic Motor For Open & Closed Center Systems w/ Integral Needle Valve

ACE Pump

comes with seal support spacer, 2 couplers & motor boltsace pump hydraulic motor 4 gpm for open and closed center systems with integral needle valve.Used on ace tractor hydraulic system dr…

MSRP:

Was:

Now: $479.95

BAC-75-HYD-204
Add to Cart
Compare Add to Cart

Ace Hydraulic Motor For Open & Closed Center Systems w/ Integral Needle Valve

ACE Pump

comes with seal support spacer, 2 couplers & motor boltsace pump hydraulic motor 8 gpm for open and closed center systems with integral needle valve.Used on ace tractor hydraulic system dr…

MSRP:

Was:

Now: $499.95

BAC-75-HYD-210
Add to Cart
Compare Add to Cart

Hydraulic Motor Driven Poly Centrifugal Pump 1" FNPT Suction, 3/4" FNPT Discharge. FMC-75-HYD-204

ACE Pump

designed for starter fertilizer and small sprayer applicationsreplace 12v diaphragm pumps and roller pumpstall blade impeller design - higher pressure at standard engine speedsall polypropylen…

MSRP:

Was:

Now: $719.95

FMC-75-HYD-204
Add to Cart
Compare Add to Cart

Hypro Centrifugal High Speed Pedestal CCW Pump 1-1/2" Suction x 1-1/4 Discharge

Hypro

This pedestal mount, cast iron and stainless steel, direct drive centrifugal pump achieves up to 140 gpm (530 lpm) and 170 psi (11.7 bar). The series includes models 9203c, 9203s, 9203c-r, and 9203s-r…

MSRP:

Was:

Now: $612.95

9203C
Add to Cart
Compare Add to Cart

Pump Casing (Volute) w/ Stainless Steel Wear Ring Replacement for Hypro 9000 Series Pumps

Hypro

hypro pump casing (volute) w/ stainless steel wear ring replacement for 9000 series pumps

MSRP:

Was:

Now: $354.95

01509000C
Add to Cart
Compare Add to Cart

Hypro Hydraulic Driven Pump 1-1/2" Inlet x 1-1/4 Outlet w/ 7 GPM Motor

Hypro

The hypro 9303c & 9303s series hydraulic motor driven, cast iron and stainless steel centrifugal pump achieves a max of 147gpm and 145psi. available in cast iron and 316 stainless steel…

MSRP:

Was:

Now: $1,214.95

9303C-HM4C
Add to Cart
Compare Add to Cart

Ace Belt Driven Centrifugal Pump 1.5" Suction x 1.25" Discharge USA Made

ACE Pump

counterclockwise rotation when facing shaft end.Stainless steel shaft and wear ring.Chemical resistant valox.Standard viton carbon/ceramic seal.Port sizes: inlet 1-1/2" npt, outlet 1-1/4" np…

MSRP:

Was:

Now: $432.95

FMC-150
Add to Cart
Compare Add to Cart

Ace Belt Driven Centrifugal Pump 1.5" Suction x 1.25" Discharge USA Made

ACE Pump

clockwise rotation when facing shaft end.Stainless steel shaft and wear ring.Chemical resistant valox.Standard viton carbon/ceramic seal.Mag-d models equipped with heavy 12v clutch.X3 model …

MSRP:

Was:

Now: $432.95

FMC-CW-150
Add to Cart
Compare Add to Cart

Ace Belt Driven Centrifugal Pump 20-Spline 1.5" Suction x 1.25" Discharge

ACE Pump

the high performance pump. 100 psi (6.9 bar) at 40 gpm (151 lpm) due to increased pulley ratio and larger 1-1/2" x 1-1/4" construction.Provides higher pressure and greater volume for applicati…

MSRP:

Was:

Now: $1,149.95

PTOC-150-1000-20SP
Add to Cart
Compare Add to Cart

PTOC 150 Series 1-3/8" x 21 Spline, 1000 RPM PTO Shaft, ACE Pump

ACE Pump

Standard 21 spline 1-3/8" (34.9mm) split bore shaft with locking collar for 1000 rpm pto models features: max flow: 100 gpm max pressure : 100 psi inlet1 -1-1/2" npt, outlet - 1-1/4" npt …

MSRP:

Was:

Now: $1,159.95

PTOC-150-1000-21SP
Add to Cart
Compare Add to Cart

PTOC 150 Series 1-3/8" x 6 Spline, 540 RPM PTO Shaft, ACE Pump

ACE Pump

the high performance pump. 100 psi (6.9 bar) at 40 gpm (151 lpm) due to increased pulley ratio and larger 1-1/2" x 1-1/4" construction.Provides higher pressure and greater volume for applicati…

MSRP:

Was:

Now: $999.95

PTOC-150-600-6SP
Add to Cart
Compare Add to Cart

Ace Hydraulic Driven Centrifugal Pump 2" Suction x 1.5" Discharge USA Made

ACE Pump

max flow: 200 gpmmax pressure: 120 psiport sizes: 2" fnpt suction, 1-1/2" fnpt dischargepump material: cast iron hydraulic motor: requires 11 gpm hydraulic flow on closed and open systemssea…

MSRP:

Was:

Now: $1,097.95

FMC-200-HYD-304
Add to Cart
Compare Add to Cart

Flex Coupling Spiders 50 - 110 series ( Same As LoveJoy & Martin)

Flex coupling spiders 50- 110 series couplings are compatible and interchangeable with lovejoy & martin.For use w/ motors, gearmotors, pumps, tools and drive equipment. A completethree piece assy…

MSRP:

Was:

Now: $4.25

L050 - L110
Add to Cart
Compare Add to Cart

Ace Hydraulic Driven Centrifugal Pump 2" Suction x 1.5" Discharge USA Made

ACE Pump

ace cast iron hydraulic driven centrifugal pump model #: fmc-200-hyd-210 centrifugal pump design provides great resistance to abrasive solutions and extra flow for agitation. The advantage…

MSRP:

Was:

Now: $997.80

FMC-200-HYD-210
Add to Cart
Compare Add to Cart

Hydraulic Driven Centrifugal Pump w/ 210 Motor 1-1/4" Suction x 1" Discharge. Ace Pump

ACE Pump

The 210 motor requires 10 gpm (37.9 lpm) maximum hydraulic fluid input. Recommended for: load sensing closed center systems open center systems up to 13 gpm (49.2 lpm) using internal needle valv…

MSRP:

Was:

Now: $949.95

FMC-HYD-210
Add to Cart
Compare Add to Cart

Ace Hydraulic Driven Centrifugal Pump 1.5" Suction x 1.25" Discharge Less Motor

ACE Pump

centrifugal pump design provides great resistance to abrasive solutions and extra flow for agitation. The advantages of the hydraulic motor driven pump are mounting versatility, customized p…

MSRP:

Was:

Now: $689.95

FMC-150-HYD-LM
Add to Cart
Compare Add to Cart

Ace Belt Driven Centrifugal Pump 1.25" Suction x 1" Discharge CCW USA Made

ACE Pump

counterclockwise rotation when facing shaft end.Stainless steel shaft and wear ring.Chemical resistant valox.Standard viton carbon/ceramic seal.1-1/4" suction , 1" dischargemax. Rpm 6000.Max…

MSRP:

Was:

Now: $449.95

FMC
Add to Cart
Compare Add to Cart

Ace Hydraulic Driven Centrifugal Pump w/ 206 Motor 1-1/4" Suction x 1" Discharge USA Made

ACE Pump

The 204 motor requires 4 gpm(15.1 lpm) maximum hydraulic fluid input. Recommended for: pressure compensating closed center systems open center systems up to 13 gpm (49.2 lpm) using internal need…

MSRP:

Was:

Now: $879.95

FMC-HYD-204
Add to Cart
Compare Add to Cart

Ace Magnetic Clutch Driven Centrifugal Pump 1.25" Suction x 1" Discharge @70 GPM

ACE Pump

counterclockwise rotation when facing shaft end.Stainless steel shaft and wear ring.Chemical resistant valox.Standard viton carbon/ceramic seal.Mag-d models equipped with heavy 12v clutch.Po…

MSRP:

Was:

Now: $799.95

FMC-MAG-D
Add to Cart