Tank Fittings & Accessories

3" Skirted Banjo 300G EPDM Gasket

Banjo

3" skirted flange gasket skirted design aligns with manifold flanges and stays in place during connections skirt provides visible confirmation that gasket is properly seated grooves facilitate visual…

Teejet Clamp Assembly 1-1/2" Square to fit 1-1/2" Square Tubing

Teejet Technologies

Teejet clamp assembly 1-1/2" square to fit 1-1/2" square tubing consist of upper and lower clamps and bolt for use with hose shank nozzle bodies

Teejet Clamp Assembly 1-1/4" Square to fit 1-1/4" Square Tubing

Teejet Technologies

Teejet clamp assembly 1-1/4" square to fit 1-1/4" square tubing consist of upper and lower clamps and bolt for use with hose shank nozzle bodies

Teejet Clamp Assembly 1" Square to fit 1" Square Tubing

Teejet Technologies

Teejet clamp assembly 1" square to fit 1" square tubing consist of upper and lower clamps and bolt for use with hose shank nozzle bodies

Teejet Clamp Assembly 1-1/4" Round to fit 11/4" Pipe (19/16" & 111/16" O.D. Tubings)

Teejet Technologies

Teejet clamp assembly 1-1/4" round to fit 11/4" pipe (19/16" & 111/16" o.D. Tubings) consist of upper and lower clamps and bolt for use with hose shank nozzle bodies

Teejet Clamp Assembly 1" Round to fit 1" Pipe (11/8", 11/4" & 13/8" O.D. Tubings)

Teejet Technologies

Teejet clamp assembly 1" round to fit 1" pipe (11/8", 11/4" & 13/8" o.D. Tubings) consist of upper and lower clamps and bolt for use with hose shank nozzle bodies

Teejet Clamp Assembly 3/4" Round to fit 3/4" Pipe (1" & 11/16" O.D. Tubings)

Teejet Technologies

Teejet clamp assembly 3/4" round to fit3/4" pipe (1" & 11/16" o.D. Tubings) consist of upper and lower clamps and bolt for use with hose shank nozzle bodies

Teejet 1-1/2" Square Vari-Spacing Clamp For Quick Teejet Bodies Used On Dry Booms

Teejet Technologies

Teejet 1-1/2" square vari-spacing clamp for quick teejet bodies used on dry booms fits 1-1/2"pipe (1-1/2" square tubing)

Teejet 1-1/4" Square Vari-Spacing Clamp For Quick Teejet Bodies Used On Dry Booms

Teejet Technologies

Teejet 1-1/4" square vari-spacing clamp for quick teejet bodies used on dry booms fits 1-1/4"pipe (1-1/4" square tubing)

Teejet 1" Square Vari-Spacing Clamp For Quick Teejet Bodies Used On Dry Booms

Teejet Technologies

Teejet 1" square vari-spacing clamp for quick teejet bodies used on dry booms fits 1"pipe (1" square tubing)

Teejet 3/4" Square Vari-Spacing Clamp For Quick Teejet Bodies Used On Dry Booms

Teejet Technologies

Teejet 3/4" square vari-spacing clamp for quick teejet bodies used on dry booms fits 3/4"pipe (3/4" square tubing)

Teejet 1-1/4" Round Vari-Spacing Clamp For Quick Teejet Bodies Used On Dry Booms

Teejet Technologies

Teejet 1-1/4" round vari-spacing clamp for quick teejet bodies used on dry booms fits 1-1/4"pipe (1-1/4" & 1-11/16" od tubings)

Teejet 1" Round Vari-Spacing Clamp For Quick Teejet Bodies Used On Dry Booms

Teejet Technologies

Teejet 3/4" round vari-spacing clamp for quick teejet bodies used on dry booms fits 1"pipe (1-1/8" & 1-1/4" & 1-3/8" od tubings)

Teejet 3/4" Round Vari-Spacing Clamp For Quick Teejet Bodies Used On Dry Booms

Teejet Technologies

Teejet 3/4" round vari-spacing clamp for quick teejet bodies used on dry booms fits 3/4"pipe (1" & 1-1/16" od tubings)

Teejet 1/2" Round Vari-Spacing Clamp For Quick Teejet Bodies Used On Dry Booms

Teejet Technologies

Teejet 1/2" round vari-spacing clamp for quick teejet bodies used on dry booms fits 1/2"pipe (13/16" & 7/8" od tubings)

Banjo Poly Bulkhead Anti Vortex Tank Fitting 2" FPT & 3" O.D

Banjo

Standard fkm (viton type) gasket.Prevents swirl in bottom of tank.

Banjo Poly Bulkhead Anti Vortex Tank Fitting 1-1/4" FPT & 2-1/4" O.D

Banjo

Standard fkm (viton type) gasket.Prevents swirl in bottom of tank.

Banjo Poly Bulkhead Tank Fitting 3" NPT & 4-1/2" OD Double Threaded w/ Gasket

Banjo

Temp. Range: -20 degrees to 150 degrees fbody material: polypropylenemax. Pressure: 150 psibasic pipe fitting material: plasticgasket material: epdmrequired hole size: 4-1/2"pipe size: 3"

Banjo Poly Bulkhead Tank Fitting 2" FPT & 3" OD Double Threaded w/ Gasket

Banjo

Temp. Range: -20 degrees to 150 degrees fbody material: polypropyleneconnection type: fnpt x fnptlength: 1"max. Pressure: 150 psibasic pipe fitting material: plasticgasket material: epdmrequired hole …

Banjo Poly Bulkhead Tank Fitting 1-1/2" FPT & 3" OD Double Threaded w/ Gasket

Banjo

Temp. Range: -20 degrees to 150 degrees fbody material: polypropyleneconnection type: fnpt x fnptlength: 1"max. Pressure: 150 psibasic pipe fitting material: plasticgasket material: epdmrequired hole …

Banjo Poly Bulkhead Tank Fitting 1-1/4" FPT & 2-1/4" OD Double Threaded w/Gasket

Banjo

Temp. Range: -20 degrees to 150 degrees fbody material: polypropyleneconnection type: fnpt x fnptlength: 3/4"max. Pressure: 150 psibasic pipe fitting material: plasticgasket material: epdmrequired hol…

Banjo Poly Bulkhead Tank Fitting 3/4" FPT & 1-5/8" O.D Double Threaded w/ Gasket

Banjo

Temp. Range: -20 degrees to 150 degrees fbody material: polypropyleneconnection type: fnpt x fnptlength: 3/4"max. Pressure: 150 psibasic pipe fitting material: plasticgasket material: epdmrequired hol…

Banjo Poly Bulkhead Anti Vortex Tank Fitting 1-1/2" FPT & 3" O.D

Banjo

Standard fkm (viton type) gasket.Prevents swirl in bottom of tank.

Banjo Poly Bulkhead Tank Fitting 2" FPT & 3-1/4" OD Double Threaded w/ Gasket

Banjo

Temp. Range: -20 degrees to 150 degrees fbody material: polypropyleneconnection type: fnpt x fnptmax. Pressure: 150 psibasic pipe fitting material: plasticgasket material: epdmrequired hole size: 3-1/…

Ace Roto Mold 16" Threaded Tank Lid w/ Air Breather

Ace Roto Mold

The 16" tank lid is a direct replacement for ace roto-mold tanks. The 16" lid also comes with the collar that sets inside the tank for complete replacement on other manufactures tanks. This lid is a d…

Ace Roto Mold 12" Threaded Inductor Tank Vented Lid

Ace Roto Mold

The 12" tank lid is a direct replacement for ace roto-mold tanks. The 12" lid also comes with the collar that sets inside the tank for complete replacement on other manufactures tanks. This is a direc…

Ace Roto Mold 8" Threaded Tank Lid w/ Air Breather

Ace Roto Mold

The 8" tank lid is a direct replacement for ace roto-mold tanks. The 8" lid also comes with the collar that sets inside the tank for complete replacement on other manufactures tanks. This lid is a dir…

Ace Roto Mold 4" Center Lid w/ Air Breather For 16" Lid

Ace Roto Mold

4" center lid w/ air breather for 16" lid.

Ace Roto Poly Bulkhead Fitting 1-1/4" FPT I.D w/ 2-1/4" Required Tank Hole Size

Ace Roto Mold

1-1/4" fpt poly double sided threads bulkhead fitting. 2-1/4" tank hole size required.

Ace Roto Poly Bulkhead Fitting 2" FPT I.D w/ 3" Required Tank Hole Size

Ace Roto Mold

2" fpt poly double sided threads bulkhead fitting. 3" tank hole size required.

Ace Roto Poly Bulkhead Fitting 1-1/2" FPT I.D w/ 3" Required Tank Hole Size

Ace Roto Mold

1-1/2" fpt poly double sided threads bulkhead fitting. 3" tank hole size required.

Ace Roto Mold 12" Threaded Inductor Tank Non-Vented Lid

Ace Roto Mold

The 12" lid also comes with the collar that sets inside the tank for complete replacement on other manufactures tanks.12" plastic tank lid includes 12" threaded non vented lid with collar.

Hypro Poly Bulkhead Sprayer Tank Adapter Fitting 1-1/2" FPT & 2-1/2" OD w/Gasket

Hypro

Hyprowbh112 bulkhead fitting bulkhead fitting featuresproclean tank and container nozzles are designed for better and faster cleaning of empty agrochemical containers and the inside of sprayer t…

Hypro Poly Bulkhead Sprayer Tank Adapter Fitting 2" FPT & 3-1/8" OD w/ Gasket

Hypro

Hypro wbh200 bulkhead fitting bulkhead fitting featuresproclean tank and container nozzles are designed for better and faster cleaning of empty agrochemical containers and the inside of sprayer tanks.…

Hypro Poly Bulkhead Sprayer Tank Adapter Fitting 3/4" FPT & 1-5/8" O.D w/ Gasket

Hypro

Hypro wbh34 bulkhead fitting bulkhead fitting featuresproclean tank and container nozzles are designed for better and faster cleaning of empty agrochemical containers and the inside of sprayer tanks. …

Teejet Clamp Assembly 1/2" Round to fit 1/2" Pipe (13/16" & 7/8" O.D. Tubings)

Teejet Technologies

Teejet clamp assembly 1/2" round to fit 1/2" pipe (13/16" & 7/8" o.D. Tubings) consist of upper and lower clamps and bolt for use with hose shank nozzle bodies

Ace Roto Poly Bulkhead Fitting 3/4" FPT I.D w/ 1-3/4" Required Tank Hole Size

Ace Roto Mold

3/4" fpt poly double sided threads bulkhead fitting. 1-3/4" tank hole size required.

3" Banjo 300GV Viton Gasket

Banjo

3" full port epdm gasket family: cam lever couplingstype: gasketstyle: vitonsize: 3"

3" Banjo 300G EPDM Gasket

Banjo

3" full port epdm gasket family: cam lever couplingstype: gasketstyle: epdmsize: 3"

2" Banjo 200GV Viton Gasket

Banjo

220 series full port viton gasket family: cam lever couplingstype: gasketstyle: vitonsize: 2"

2" Banjo 200G EPDM Gasket

Banjo

220 series full port epdm gasket family: cam lever couplingstype: gasketstyle: epdmsize: 2"

1-1/2" Banjo 150GV Viton Gasket

Banjo

description: 200 series vton gasket family: cam lever couplingstype: gasketstyle: vitonsize: 1-1/2"

1-1/2" Banjo 150G EPDM Gasket

Banjo

description: 200 series epdm gasket family: cam lever couplingstype: gasketstyle: epdmsize: 1-1/2"

Brass Bulkhead Fitting 1/4" FPT I.D w/ 3/4" Required Tank Hole Size

Ace Roto Mold Mfg.

Bulkhead fitting 1/4" id 3/4" required hole size brass o'ring included

3" Poly Siphon Tube for 3" Bulkhead Fittings

Banjo

banjo ast300 3" siphon tube used with 3" bulkhead fittings tube's material - polypropylene

2" Poly Siphon Tube for 2" Bulkhead Fittings

Banjo

banjo ast200 2" siphon tube used with 2" bulkhead fittings tube's material - polypropylene

Hypro Poly Bulkhead Sprayer Tank Adapter Fitting 1" FPT & 2-1/16" O.D w/ Gasket

Hypro

Hypro wbh100 bulkhead fitting bulkhead fitting featuresproclean tank and container nozzles are designed for better and faster cleaning of empty agrochemical containers and the inside of sprayer tanks.…

Banjo Poly Bulkhead Tank Fitting 1" FPT & 2-1/4" O.D Double Threaded w/ Gasket

Banjo

Temp. Range: -20 degrees to 150 degrees fbody material: polypropyleneconnection type: fnpt x fnptlength: 3/4"max. Pressure: 150 psibasic pipe fitting material: plasticgasket material: epdmrequired hol…