Field Cultivator Parts

Field Cultivator Point / Spring Tooth, 2" x 5/16" x 11"

cultivator spring tooth point 2" x 11" takes 7/16" x 1-1/2" bolts slotted 3/8" hole 211-d

2" x 2" S-Tine Clamp

Farmer Bob's Parts

type a description for this product here...

S-Tine for John Deere 960 Field Cultivators 32mm x 12mm x 660mm

Farmer Bob's Parts

this s-tine shank is designed for high clearance cultivators. It has an overall length measuring 26 inches and a ground clearance measuring 14-1/2 inches. The ground clearance is the distance …

45mm x 12mm x 660mm, S-Tine for Field Cultivators, High Clearance High Clearance Tine

this s-tine shank is designed for high clearance cultivators. It has an overall length measuring 26 inches and a ground clearance measuring 14-1/2 inches. The ground clearance is the distance …

32mm x 12mm x 660mm, S-Tine for Field Cultivators, High Clearance

this s-tine shank is designed for high clearance cultivators. It has an overall length measuring 26 inches and a ground clearance measuring 14-1/2 inches. The ground clearance is the distance …

S-Tine for Field Cultivators 32mm x 12mm x 560mm Heavy Duty

Farmer Bob's Parts

32mm x 12mm x 560mm, s-tine for field cultivators. Heavy duty specificationsdanish s-tine shankfits kmc and othersstandard dutyground clearance: 14-1/2 in.Overall length: 22 in.Width: 32 mm (…

Danish S-Tine Shank, Standard Duty, 14-1/2" Clearance

Farmer Bob's Parts

danish s-tine shank is built for standard duty work. The shank has 14-1/2 inches of ground clearance and is 22 inches overall in length. The s-tine shank is 32 mm (1.26 in.) and 10 mm thick (0…

Box Blade Shank w/ Point, 4 Hole, 18" x 3/4" x 2-1/2"

box blade shank w/ point, 4 hole 18" x 3/4" x 2-1/2"

Box Blade Shank w/ Point, 3 Hole, 16" x 3/4" x 2-1/2"

box blade shank w/ point, 3 hole 16" x 3/4" x 2-1/2"

Box Blade Shanke & Point, 3 Slot Front 18” 3/4” 2-1/2”

box blade shank w/ point, 3 slot front 16" x 3/4" x 2-1/2"

Box Blade Shank w/ Point, 2 Slot Front, 16" x 3/4" x 2-1/2"

box blade shank w/ point, 2 slot front 16" x 3/4" x 2-1/2"

Field Cultivator Point / Spring Tooth, 2" x 11" x 0.3125" takes 3/8" Bolts

cultivator spring tooth point 2" x 11" takes 7/16" x 1-1/2" bolts slotted 3/8" hole 211d

Field Cultivator Point / Spring Tooth, 2" x 11" x 0.3125" takes 7/16" Bolts

cultivator spring tooth point 2" x 11" takes 7/16" x 1-1/2" bolts slotted 7/16" hole 211d

Field Cultivator Point / Spring Tooth , 2.50" x 11" x 0.3125" takes 7/16" Bolts

cultivator spring tooth point 2-1/2" x 11" takes 7/16" x 1-1/2" bolts slotted 7/16" hole 210a

Field Cultivator Reversible Point / Spring Tooth , 1.75" x 11" x 0.25" with 1.3125" - 1.75" Bolt Spacing

cultivator point 1-3/4 x 11 x 1/4 slotted 3/8 hole fits 1-5/8" - 1-3/4 centers df010

Field Cultivator Reversible Point / Spring Tooth , 2" x 10-1/2" x 5/16" with 1.25" - 2.25" Bolt Spacing

bolt size: 7/16” x 1-14" (most common unless thicker shank)center: 1-1/4” - 2-1/4”description: 5/16" thickness - press-formedwidth: 2”

Field Cultivator Reversible Point / Spring Tooth , 3" x 10.5" x 5/16"

this particular field cultivator point measures 10-1/2 in. Long, 3 in. Wide, and 5/16 in. Thick. It has a slotted bolt pattern that fits a variety of machinery. Specificationsfield cultivator…

Field Cultivator Reversible Point / Spring Tooth , 1-1/2" x 10-1/2" x 5/16" with 1.75 bolt spacing

7/16” bolt holes, 1-1/4” - 2-1/4” hole spacing,1-1/2” x 10-1/2” x 5/16”

Field Cultivator Reversible Point / Spring Tooth , 2" x 5/16" x 10-1/2"

this particular field cultivator point measures 10-1/2 in. Long, 2 in. Wide, and 5/16 in. Thick. It has a slotted bolt pattern that fits a variety of machinery. Specificationsfield cultivator…

Field Cultivator Reversible Point / Spring Tooth , 1.5" x 10.5" x 5/16"

this particular field cultivator point measures 10-1/2 in. Long, 1-1/2 in. Wide, and 5/16 in. Thick. It has a slotted bolt pattern that fits a variety of machinery. Specificationsfield cultiv…

Twisted Chisel Slash Point Right Hand 4" x 1/2" x 26"

Osmundson

4" wide right hand slash point1/2" thick, 26" long, 2-1/4" to 2-1/2" c-c bolt holes, uses 1/2" plow bolts interchange cc1245l sos02 occ124l5 cc124l5

Twisted Chisel Slash Point Left Hand 4" x 1/2" x 26"

Osmundson

4" wide left hand slash point1/2" thick, 26" long, 2-1/4" to 2-1/2" c-c bolt holes, uses 1/2" plow bolts interchange cc1245l sos02 occ124l5 cc124l5

Twisted Chisel Left Twist 2.25" - 2.50" Centers 3" x 1/2" x 22"

Osmundson

3" left twisted chisel plow point. 1/2" bolt holes on 2-1/4" - 2-1/2" centers. Uses 3" x 1/2" bolts

Twisted Chisel Right Twist 2.25" - 2.50" Centers 3" x 1/2" x 22"

3" right twisted chisel plow point. 1/2" bolt holes on 2-1/4" centers. Uses 3" x 1/2" bolts

Twisted Chisel Right Twist 2.25" Centers 3" x 1/2" x 22"

3" right twisted chisel plow point. 1/2" bolt holes on 2-1/4" centers.

Twisted Chisel LH 2.25" Centers 3" x 1/2" x 22"

3" left twisted chisel plow point. 1/2" bolt holes on 2-1/4" centers.

Twisted Chisel Soil Saver Moldboard LH 26" x 4" x 1/2"

soil saver moldboards & points for chisel plowstwisted chisel for chisel plowslh twistdimensions: 1/2" x 4" x 22"5-holes, 1/2" on 2-1/4" centersfits: glencoe, brillion, landoll, bush hog, …

Twisted Chisel Soil Saver Moldboard RH 26" x 4" x 1/2"

soil saver moldboards & points for chisel plowstwisted chisel for chisel plowslh twistdimensions: 1/2" x 4" x 22"5-holes, 1/2" on 2-1/4" centersfits: glencoe, brillion, landoll, bush hog, …

Twisted Chisel Moldboard LH 26" x 4" x 1/2"

soil saver moldboards & points for chisel plowstwisted chisel for chisel plowslh twistdimensions: 1/2" x 4" x 22"5-holes, 1/2" on 2-1/4" centersfits: glencoe, brillion, landoll, bush hog, …

Twisted Chisel Moldboard RH 26" x 4" x 1/2"

soil saver moldboards & points for chisel plowstwisted chisel for chisel plowsrh twistdimensions: 1/2" x 4" x 22"5-holes, 1/2" on 2-1/4" centersfits: glencoe, brillion, landoll, bush hog, …

Chisel Spike 18" x 2" x 7/8" Straight on 2.25" - 2.50" Centers & uses 1/2" x 3" Bolts

18" x 2" x 7/8" chisel spike straight,on2.25" - 2.50" centers & uses 1/2" x 3" bolts

Chisel Spike 18" x 2" x 5/8" Straight on 2.25" - 2.50" Centers & uses 1/2" x 3" Bolts

18" x 2" x 5/8" chisel spike straight,on2.25" - 2.50" centers & uses 1/2" x 3" bolts

Chisel Spike 18" x 2" x 5/8" Straight on 2.25" Centers & uses 7/16 Bolt Holes

18" x 2" x 5/8" chisel spike straight,on 2.25" centers & uses 7/16 bolt holes

Harrow Tooth Diamond Shaped 5/8" x 7/8" w/ 1/2" threads

diamond shaped 5/8" x 7/8" harrow tooth with 1/2" threads. Bolt length is 2 1/2". Overall length is 8 1/2". . for mcfarlane equipment, replaces oem# 56021900

7/16" Diamond Points Chisels Spikes Heavy Duty 16" x 2" x 5/8"

diamond point chiselsheavy duty, this series is like those sold as standardequipment on most chisel plows.• high-carbon, heat-treated steel• 2-1/4” hole spacing

1/2" Diamond Points Chisels Spikes Heavy Duty 16" x 2" x 5/8"

diamond point chiselsheavy duty, this series is like those sold as standardequipment on most chisel plows.• high-carbon, heat-treated steel• 2-1/4” hole spacing

1-3/4” x 5/16” x 10” Quacker Point

Quacker,made from flat stock material - oil quenched, heattreated. A full 5/16” thick to give these new quakersthat extra measure of dependabliliy and longer life.All quakers are punched w…

Osmundson 1858 Reversible Chisel Plow Spike 7/16" & 1/2" Thickness

Straight chisel spikes this spike has upset points for increased wear andlonger life. Even after considerable use these spikesretain their original shape and stay sharp. Oil quenchedand heat treated.

S-Tine Sweeps Sizes 1" 2-3/4" 4" 7" 10" w/ Thickness 1/4"

S-tine sweeps,sweeps are 1/4” thick, made to fit the danish “s” tineand other field preparation equipment of this type.Uses 3/8” x 1-1/4” #8 head bolt.

Reversible Points for Field & Row Crop Cultivators

Reversible pointsmanufactured from high-grade,heat-treated steel.For field & row crop cultivators,spring tooth harrows

41° WFC Series Sweeps 3/8" Bolt Holes

41° wfc series sweeps 3/8" bolt holes high carbon steel heat treated sizes 4" , 6" ,7" 8" 9" 10" & 12"

Specialty Row Crops Sweeps (Peanuts, Vegetables, & more)

Peanut sweepsfor “vegetables” & “speciality crops”.. • 56° stem angle• 7/16” bolt holes (2)• 1-1/4” to 2-1/4” hole spacing•…

3/4" x 12" Square Harrow Tooth For McFarlane & John Deere

harrow tooth, 3/4” square x 12”, with head, john deere 2310 mulch finisher. Mcfarlane ctm harrow, rbh rolling basket and harrow; quadra-till qt100, qt200

Penetration Sweeps Chisel Plow McKay-Empire

Penetration sweeps chisel plow mckay-empire. High carbon heat treated steel. 50° stem angle 1/2" bolt holes 2-1/4" spacing

54° Field Cultivato Row Crop Sweep ( 4" - 18" )

54° row crop sweep high carbon steel 54° stem with 7/16" bolt holes

Taper Field Cultivator Sweeps (Universal Applications)

wiese corporation

Taper sweeps,• 55° stem angle• 7/16” bolt holes (2)• 2-1/4” hole spacing• center hole for 5/8” carriage boltuniversal economy sweepfor all row crop cult…

V-Bolt For Harrow Teeth 7/16"

V-bolt for harrow teeth 7/16" w/ nut

VIPER Field Cultivator Sweeps 7" & 9", 7.5mm w/ 7/16 Bolt Holes

Viper sweeps provide superior wear compared to conventional 6mm or 1/4" thick sweeps the built in stem protector also minimizes wear on bolts and stem heavy duty 7.5mm thickness 7/16" bolt size 47…

Shovel with Spear Point

Osmundson

Spear point shovel,oil quenched and heat treated. Will fit ihc vibra shank.Made from 1/4” flat stock materials. (use two 7/16: x 1-1/4”#3 head bolt) the spear point shovel is punched…

3/4" x 8" Harrow Tooth Square w/ No Head

Special Products

Harrow tooth, 3/4” square x 8”, with head,clamp type; for ihc, john deere & noble