Garden Disc Harrow (short lines)

Replacement JD Trunnion Disc Harrow Bearing Assembly with 1-1/8" Square Bore for Models 1630 , 1635 & 1640

Aftermarket

1-1/8" square shaft for john deere: b2, bw, bwn & bws disk harrow. This is a complete assembly that includes all new parts. Contains:1.) b27317 trunnion housing (1pc)2.) ak3997b ball bearing with...

Replacement JD Trunnion Disc Harrow Bearing Assembly with 1-1/2" Square Bore for Models 1630 , 1635 & 1640

Aftermarket

Replacement jd trunnion disc harrow bearing assembly with 1-1/2" square bore   john deere models : 1630 , 1635 & 1640

2 of Bearing Caps for Ribbed Spool w/ Grease Fittings on 3" Bolt Center

Aftermarket

2 bearing caps for ribbed spool, w/ grease fittings on 3" bolt centerused with the ribbed 7.5' spool w/ 1" square bore

9" x 1 1/8" Cast Disc Harrow Bearing Unit Complete with Caps & Bolts 9" Spacing

Aftermarket

9" x 1 1/8"  cast disc harrow bearing unit complete with caps & bolts 9" spacing

Bearing Cap w/ Grease Fittings 3" center's common on 1" Axles Requires 2 per set

Aftermarket

Replacing spacer spools and bearing housing is easy and quick with the correct tools. This half disc bearing housing is coupled together around a corresponding spacer spool. Once joined, they can be..…

1-1/8" Bore x 9" Long, Spacer Spool Ribbed

Aftermarket

Rib bearing spacer spooloverall length: 9"fits 1-1/8" axlematerial: 30 grade grey ironsurface treatment: sandblasting, to

1-1/8" Bore x 1-3/4" Long, Half Spacer Spool Plain

Aftermarket

Half bearing spacerfits a 1-1/8" square axle1-1/8'' square x 1-3/4'' long half bearing spacerfits disc harrowbottom measurement: 4 in.Made of cast steel top diameter: 2-5/16"

1-1/8" Bore x 3-1/4" Long, Half Spacer Spool Plain

Aftermarket

1-1/8" x 3-1/4" half bearing spacer is used on disc harrows. This half bearing spacer is used on a 1-1/8" square axle. Specifications1-1/8" x 3-1/4" half bearing spacersolid inside top to...

1-1/8" Bore x 4-1/2" Long, Spacer Spool Plain

Aftermarket

1-1/8" x 4-1/2" half bearing square spacersolid inside top to bottombottom base measurement: 4"thickness: 9/16"long piece length: 3-1/4"measurement length angle of base: 1"

1-1/8" Bore X 7-1/2" Long, Spacer Spool Plain

Aftermarket

This plain bearing spacer spool is 7-1/2 inches long and work on a 1-1/8" inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain...

1-1/8" Bore x 9" Long, Spacer Spool Plain

Aftermarket

This plain bearing spacer spool is 9 inches long and work on a 1-1/8 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain...

Bearing Cap for Ribbed Spool w/ Grease Fitting on 4-1/4" Bolt Center

Aftermarket

Bearing caps for ribbed spool, w/ grease fittings on 4-1/8" bolt center

1-1/8" Square Bore Bumper Washer

Aftermarket

Bumper washer fits w & a bedder6 in. Od with 1-1/8 in. Center x 1 in. Thick

1-1/8" Axle Disc Harrow End Washer

Aftermarket

This 1-1/8" x 1-1/4" end spacer fits several makes of disc harrows. Specifications thickness : 1-1/4" axle size : 1-1/8"

1-1/8" Bore x 7-1/2" Long, Spacer Spool Ribbed

Aftermarket

These bearing spacer spools are 7-1/2 inches long and work on a 1-1/8 inch square axle. Made of cast iron, they are durable. The assembly is equipped with a grease fitting and can be lubricated...

1" Bore x 7-1/2" Long, Spacer Spool Ribbed uses 2 Caps

Aftermarket

These bearing spacer spools are 7-1/2 inches long and work on a 1 inch square axle. Made of cast iron, they are durable. The assembly is equipped with a grease fitting and can be lubricated for...

1" Bore x 2-3/8" Long, Spacer Spool Plain

Aftermarket

This plain bearing spacer spool is 2-3/8" inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain...

Disc Harrow Half Spacer Spool 5-1/8" Length with 1" Bore

Aftermarket

This plain bearing spacer spool is 5-1/8" inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain...

1" Bore x 3-5/8" Long, Spacer Spool Plain

Aftermarket

This plain bearing spacer spool is 9 inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain without...

1" Bore x 9" Long, Spacer Spool Plain

Aftermarket

This plain bearing spacer spool is 9 inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain without...

1" Bore x 7 1/2" Long, Spacer Spool Plain

Aftermarket

This plain bearing spacer spool is 7-1/2 inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain...

1" Square Bore Bumper Washer

Aftermarket

This bumper washer is 6-1/4 inches in diameter and has an overall thickness of 1 inch. Where the bumper washer meets the head of the disc harrow axle, the washer is 1/2 in. Thick. This washer fits...

1" Square Bore Lock Washer

Aftermarket

Specifications 1 in. End washerused for 1 in. Disc harrow axleoverall diameter: 3 1/2 in.Wider surface goes against the bladethickness: 1-1/4 in.

FB3090 1 3/4 Trunion Bearing Complete. fits Sunflower, Amco

Fb3090 trunion bearing complete. Trunion bearing assembley, 1-3/4" round, fits sunflower disc models 1130, 1211, 1212, 1231, 1232, 1233, 1234, 1321, 1331, 1431, 1432, 1433, 1434, 1435, 1441, 1442,...

7-1/2" x 1" Cast Disc Harrow Bearing Unit Complete w/ Caps & Bolts for 7-1/2" SPACING

Aftermarket

The ds200 7.5" x 1" disc harrow bearing unit is a complete spool bearing assembly designed for equipment with 7-1/2 inch disc spacing and 1" square harrow axles. This heavy-duty cast unit includes a..…

FB201492. Convex Spacer 1-1/8" Sq Universal

Convex spacer w/ machinedbearing surface, 2 1/8” lengthx 4 3/4” o.D.

1-1/8" Square Bore x 7-1/2" Cast Disc Harrow Bearing Unit, Complete

Aftermarket Case-IH

7-1/2" disc spool bearing assembly for 7-1/2" disc spacing for 1-1/8" axlesfits 1-1/8" square harrow axle(1) 7-7/16" tall rib spool with both caps and bol

Bendable Lock Washer for 1-1/8" Axles

Aftermarket

Bendable lock washer for 1-1/8" axles. Bends to lock nut in place on the axle.

4" Half Spool / Spacer fits 1-1/8" Square & 1-1/2" Round Case-IH Disc's Harrows

Aftermarket Case-IH

Oem # 101191c1 replacement disc spool 4" 4" half spool with round hole for case-ih discs with 1-1/8" square axles and case-ih or new holland discs with 1-1/2" round axles. Use with 7-1/2"...