Do All / Does More Parts

2 of Bearing Caps for Ribbed Spool w/ Grease Fittings on 3" Bolt Center

Aftermarket

2 bearing caps for ribbed spool, w/ grease fittings on 3" bolt centerused with the ribbed 7.5' spool w/ 1" square bore

Bearing Cap w/ Grease Fittings 3" center's common on 1" Axles Requires 2 per set

Aftermarket

replacing spacer spools and bearing housing is easy and quick with the correct tools. This half disc bearing housing is coupled together around a corresponding spacer spool. Once joined, they …

1-1/8" Bore x 9" Long, Spacer Spool Ribbed

Aftermarket

rib bearing spacer spooloverall length: 9"fits 1-1/8" axlematerial: 30 grade grey ironsurface treatment: sandblasting, to prevent rustcolor: gloss black paint thickness: 1/8"overall diameter o…

1-1/8" Bore x 1-3/4" Long, Half Spacer Spool Plain

Aftermarket

half bearing spacerfits a 1-1/8" square axle1-1/8'' square x 1-3/4'' long half bearing spacerfits disc harrowbottom measurement: 4 in.Made of cast steel top diameter: 2-5/16"

1-1/8" Bore x 3-1/4" Long, Half Spacer Spool Plain

Aftermarket

1-1/8" x 3-1/4" half bearing spacer is used on disc harrows. This half bearing spacer is used on a 1-1/8" square axle. Specifications1-1/8" x 3-1/4" half bearing spacersolid inside top to bot…

1-1/8" Bore x 4-1/2" Long, Spacer Spool Plain

Aftermarket

1-1/8" x 4-1/2" half bearing square spacersolid inside top to bottombottom base measurement: 4"thickness: 9/16"long piece length: 3-1/4"measurement length angle of base: 1"

1-1/8" Bore X 7-1/2" Long, Spacer Spool Plain

Aftermarket

this plain bearing spacer spool is 7-1/2 inches long and work on a 1-1/8" inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is pl…

1-1/8" Bore x 9" Long, Spacer Spool Plain

Aftermarket

this plain bearing spacer spool is 9 inches long and work on a 1-1/8 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain w…

Bearing Cap for Ribbed Spool w/ Grease Fitting on 4-1/4" Bolt Center

Aftermarket

Bearing caps for ribbed spool, w/ grease fittings on 4-1/8" bolt center

1-1/8" Square Bore Bumper Washer

Aftermarket

bumper washer fits w & a bedder6 in. Od with 1-1/8 in. Center x 1 in. Thick

1-1/8" Axle Disc Harrow End Washer

Aftermarket

this 1-1/8" x 1-1/4" end spacer fits several makes of disc harrows. Specifications1-1/8" x 1-1/4"end spacerfits disc harrow

1-1/8" Bore x 7-1/2" Long, Spacer Spool Ribbed

Aftermarket

these bearing spacer spools are 7-1/2 inches long and work on a 1-1/8 inch square axle. Made of cast iron, they are durable. The assembly is equipped with a grease fitting and can be lubricate…

1" Bore x 7-1/2" Long, Spacer Spool Ribbed uses 2 Caps

Aftermarket

these bearing spacer spools are 7-1/2 inches long and work on a 1 inch square axle. Made of cast iron, they are durable. The assembly is equipped with a grease fitting and can be lubricated fo…

1" Bore x 2-3/8" Long, Spacer Spool Plain

Aftermarket

this plain bearing spacer spool is 2-3/8" inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain …

Disc Harrow Half Spacer Spool 5-1/8" Length with 1" Bore

Aftermarket

this plain bearing spacer spool is 5-1/8" inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain …

1" Bore x 3-5/8" Long, Spacer Spool Plain

Aftermarket

this plain bearing spacer spool is 9 inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain witho…

1" Bore x 9" Long, Spacer Spool Plain

Aftermarket

this plain bearing spacer spool is 9 inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain witho…

1" Bore x 7 1/2" Long, Spacer Spool Plain

Aftermarket

this plain bearing spacer spool is 7-1/2 inches long and work on a 1 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain w…

1" Square Bore Bumper Washer

Aftermarket

this bumper washer is 6-1/4 inches in diameter and has an overall thickness of 1 inch. Where the bumper washer meets the head of the disc harrow axle, the washer is 1/2 in. Thick. This washer …

1" Square Bore Lock Washer

Aftermarket

specifications 1 in. End washerused for 1 in. Disc harrow axleoverall diameter: 3 1/2 in.Wider surface goes against the bladethickness: 1-1/4 in.

KMC Hipper Housing Fits Kelley Hippers

Housing for 1-1/8" kmc hippers

DO-ALL Drag Board Leaf Spring for JD, IHC, Noble, FC & more

Do-all drag board leaf spring for jd, ihc, noble, fc & more length : 30" width : 1 3/4" weight : 12.25 john deere finishing harrow models 400, 600, 610, 810 noble do-all…