Fits 1-1/8" Axles

9" x 1 1/8" Cast Disc Harrow Bearing Unit Complete with Caps & Bolts 9" Spacing

Aftermarket

9" x 1 1/8"  cast disc harrow bearing unit complete with caps & bolts 9" spacing

1-1/8" Bore x 9" Long, Spacer Spool Ribbed

Aftermarket

Rib bearing spacer spooloverall length: 9"fits 1-1/8" axlematerial: 30 grade grey ironsurface treatment: sandblasting, to

1-1/8" Bore x 1-3/4" Long, Half Spacer Spool Plain

Aftermarket

Half bearing spacerfits a 1-1/8" square axle1-1/8'' square x 1-3/4'' long half bearing spacerfits disc harrowbottom measurement: 4 in.Made of cast steel top diameter: 2-5/16"

1-1/8" Bore x 3-1/4" Long, Half Spacer Spool Plain

Aftermarket

1-1/8" x 3-1/4" half bearing spacer is used on disc harrows. This half bearing spacer is used on a 1-1/8" square axle. Specifications1-1/8" x 3-1/4" half bearing spacersolid inside top to...

1-1/8" Bore x 4-1/2" Long, Spacer Spool Plain

Aftermarket

1-1/8" x 4-1/2" half bearing square spacersolid inside top to bottombottom base measurement: 4"thickness: 9/16"long piece length: 3-1/4"measurement length angle of base: 1"

1-1/8" Bore X 7-1/2" Long, Spacer Spool Plain

Aftermarket

This plain bearing spacer spool is 7-1/2 inches long and work on a 1-1/8" inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain...

1-1/8" Bore x 9" Long, Spacer Spool Plain

Aftermarket

This plain bearing spacer spool is 9 inches long and work on a 1-1/8 inch axle. Made of cast iron, it is extremely durable and can hold up well after years of use. This spacer spool is plain...

Bearing Cap for Ribbed Spool w/ Grease Fitting on 4-1/4" Bolt Center

Aftermarket

Bearing caps for ribbed spool, w/ grease fittings on 4-1/8" bolt center

1-1/8" Square Bore Bumper Washer

Aftermarket

Bumper washer fits w & a bedder6 in. Od with 1-1/8 in. Center x 1 in. Thick

1-1/8" Axle Disc Harrow End Washer

Aftermarket

This 1-1/8" x 1-1/4" end spacer fits several makes of disc harrows. Specifications thickness : 1-1/4" axle size : 1-1/8"

1-1/8" Bore x 7-1/2" Long, Spacer Spool Ribbed

Aftermarket

These bearing spacer spools are 7-1/2 inches long and work on a 1-1/8 inch square axle. Made of cast iron, they are durable. The assembly is equipped with a grease fitting and can be lubricated...

1-1/8" Square Bore x 7-1/2" Cast Disc Harrow Bearing Unit, Complete

Aftermarket Case-IH

7-1/2" disc spool bearing assembly for 7-1/2" disc spacing for 1-1/8" axlesfits 1-1/8" square harrow axle(1) 7-7/16" tall rib spool with both caps and bol