Description
This pillow block housing fits insert bearings with 110mm OD curved outer race. This housing is cast iron and has a low shaft center height compared to other pillow block housings. The housing includes a grease fitting for lubricating re-lube style bearings.
Dimensions:
Fits bearings with OD of: 110MM
Bolt hole to bolt hole: 7.51 in. (191mm)
Overall length: 9.48 in. (241mm)
Shaft height: 2.68 in. (68.3mm)
Overall height: 5.35 in. (136mm)
Bolt hole: .70 in. (18mm)
