This pillow block housing fits insert bearings with 100mm OD curved outer race. This housing is cast iron and has a low shaft center height compared to other pillow block housings. The housing includes a grease fitting for lubricating re-lube style bearings.
Fits bearings with OD of: 100MM
Bolt hole to bolt hole: 7.126 in. (181mm)
Overall length: 9.13 in. (232mm)
Shaft height: 2.43 in. (61.9mm)
Overall height: 4.84 in. (123mm)
Bolt hole: .708 in. (18mm)