Description
This pillow block housing fits insert bearings with 80mm OD curved outer race. This housing is cast iron and has a low shaft center height compared to other pillow block housings. The housing includes a grease fitting for lubricating re-lube style bearings.
Dimensions:
Fits bearings with OD of: 80MM
Bolt hole to bolt hole: 5.51 in. (140mm)
Overall length: 7.126 in. (181mm)
Shaft height: 1.937 in. (49.2mm)
Overall height: 3.85 in. (98mm)
Bolt hole: .551 in. (14mm)
