This pillow block housing fits insert bearings with 72mm OD curved outer race. This housing is cast iron and has a low shaft center height compared to other pillow block housings. The housing includes a grease fitting for lubricating re-lube style bearings.
Fits bearings with OD of: 72MM
Bolt hole to bolt hole: 5 in. (127mm)
Overall length: 6.57 in. (167mm)
Shaft height: 1.81 in. (46mm)
Overall height: 3.58 in. (91mm)
Bolt hole: .551 in. (14mm)