Shop By Equipment Type

Tail Wheel Fork Yoke 1.25" Shaft with 1" Axle Hole & 7" Usable Length

Tail wheel yoke 1-1/4" shaft w/ 1" axle holes 5-3/8" inside diameter9/16" pin hole

Teejet Matrix 908 20' Antenna Cable for RXA-52

Teejet Technologies

teejet matrix 908 20' antenna cable for rxa-52 expandable. Rugged. Easy to use. The teej…

Teejet Matrix 908 Ram Mount Kit

Teejet Technologies

Ram mount kit only expandable. Rugged. Easy to use. The teejetmatrix 908is an all new field computer with expandable options to appeal to any agricultural application. You can choos…

Teejet Matrix 908 Boom Sense Nav Cable

Teejet Technologies

Cable only expandable. Rugged. Easy to use. The teejetmatrix 908is an all new field computer with expandable options to appeal to any agricultural application. You can choose betwee…

Replacement GF17 Heavy Duty Actuator For Automotive, Agricultural, Lawn and Garden, Process Automation, Marine, Robotics

Concentric International

Our id high performance (gf17 series) linear actuators are ideally suited for many industrial, agricultural, automotive, and off-highway applications.offered in seven stroke lengths from 4&rdquo…

Replacement Nut For BB37 Shoulder Rotary Cutter Blade Bolt For John Deere & Servis Rhino

buchanan metal

Replacement nut for bb37 shoulder rotary cutter blade bolt for john deere & servis rhino

Teejet Replacement 65-05243 Mounting Bracket for RXA-52 Antenna for Matrix 908 Field Guidance System

Teejet Technologies

this is only the metal mounting bracket! the teejetmatrix 908is an all new field computer with expandable options to appeal to any agricultural application. Yo…

1-1/8" Square x 68-3/4" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1-1/8" square and 68-3/4"long. Constructed of heat treated steel. Right hand thread with nut.

1-1/8" Square x 59-3/4" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1-1/8" square and 59-3/4"long. Constructed of heat treated steel. Right hand thread with nut.

Teejet Ram Mounting Plate for Matrix 430 with Patch Antenna

Teejet Technologies

Mounting plate for maxtrix gps with patch antenna

Replacement Rotary Blade 27" x 4" x 0.5" w/ 1.5" Hole CCW Fits CX15 & HX15

Haven Steel

Check the serial number for correct model blades!!!Fits hx15 before serial number wohx15x004260 and cx15 before serial number wocx15x002230. Typically used for tractor-drawn industrial and agricultur…

Set of 6 Rotary Blades for Later Model HX15 & CX15 ( Check Serial Numbers Below )

Haven Steel

Check the serial number for correct model blades!!! Aftermarket jd mower blades for later models. 6 blades (4 ccw & 2 cw blades). Fits jd hx15 after serial number wohx15x004260 and cx15 after seri…

Set of 6 Rotary Blades for Model HX15 & CX15 Check Serial Numbers Below)

Haven Steel

Check the serial number for correct model blades!!!Fits jd hx15 before serial number wohx15x004260 and cx15 before serial number wocx15x002230. 45326 - 45327: 21.75" x 4" x 0.5" w/ 1.5" hole52742: 27…

Teejet Matrix 430 Ag Guidance System Console Only

Teejet Technologies

Console only - no wiring included ! the compact matrix 430 is an easy to use, low cost, graphical guidance system ideal for first-time users. The full-color, touchscreen display allows …

R-4 Specialty Clipper Vise Lacer Fits Hook Sizes #2-#7 & U2-U7 Replaces 03018

Aftermarket

The reliable vise lacer is the most economical method of installing clipper® hooks, ideal for users with few belts. Fits in a shop vise. Offers the continuous lacing feature which, with multiple o…

R-7 Specialty Clipper Vise Lacer Fits Hook Sizes #2-#7 & U2-U7 Replaces 03019

Aftermarket

The reliable vise lacer is the most economical method of installing clipper® hooks, ideal for users with few belts. Fits in a shop vise. Offers the continuous lacing feature which, with multiple o…

R-10 Specialty Clipper Vise Lacer Fits Hook Sizes #2-#7 Replaces 03020

Aftermarket

The reliable vise lacer is the most economical method of installing clipper® hooks, ideal for users with few belts. Fits in a shop vise. Offers the continuous lacing feature which, with multiple o…

Scraper Spring For JD for 9" spacing 6-11/16" Overall Length

Scraper spring for jd for 9" spacing spring, for scraper blade, overall length 6-11/16".for john deere disc harrow models with 9" spacing, fits 110, 111, 115, 210, 220, 230, 235, …

1-1/8" Square x 76.9" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1-1/8" square and 76.9" long. Constructed of heat treated steel. Right hand thread with nut.

Kwik-D-Tach PTO Adapter 1 3/8" 6 Spline Female x 1 3/8" 21 Male

Hub City

Kwik-d-tach pto adapter 1 3/8" 6 spline female x 1 3/8" 21 male female spline : 1 3/8" 6 spline male spline : 1 3/8" 21 spline overall length : 6 1/2" extends pto :…

Replacement 2.50" x 1.00" with 1.00" Shoulder Rotary Cutter Blade Bolt Kit For John Deere & Servis Rhino

buchanan metal

Replacement 2.50" x 1.00" rotary cutter blade bolt for john deere & servis rhino replaces : bb37, c37, 36107a2alh, wwp36107a2al bolt only : bb37 head dimensions: 1.64" x 1.93"overal…

Replacement 2.875"x 1.00" With 1.00" Hex Shoulder Rotary Cutter Blade Bolt Kit For John Deere

buchanan metal

Replacement 2.875" x 1.00" with 1.00" hex shoulder rotary cutter blade bolt kit for john deere replaces : bb26 , w38054 bolt only : bb26 specifications blade bolt to fit john deere w…

1-1/8" Square x 40-1/4" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1-1/8" square and 40-1/4" long. Constructed of heat treated steel. Right hand thread with nut. ga…

1" Square x 41" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1" square and 41" long. Constructed of heat treated steel. Right hand thread with nut.

1" Square x 39-5/8" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1" square and 39-5/8" long. Constructed of heat treated steel. Right hand thread with nut.

1" Square x 30-5/8" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1" square and 31" long. Constructed of heat treated steel. Right hand thread with nut.

1" Square x 26-1/2" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1" square and 26-1/2" long. Constructed of heat treated steel. Right hand thread with nut.

1" Square x 34" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1" square and 34" long. Constructed of heat treated steel. Right hand thread with nut.

43" Black Tapered Bale Spears w/ Nut 3,500 LB Cap 28 MM Dia. Italian Made

Aftermarket

Even hay spears become worn or break and no longer function. When this happens, be sure to replace them with our bale spears that are heat treated and are forged with a tapered end so can easily slip …

Bale Spear Sleeve 5-11/16" Long 2-3/8" OD w/ 1-1/4" to 1-3/4" ID

Aftermarket

Replace your bale bushings occasionally to ensure the best possible performance of your agricultural equipment. It is suggested that replacement bale bushings should be bought alongside each new bale …

Bale Spear Sleeve 4.33" Long 1.77" OD w/ 1.02" to 1.39" ID

Aftermarket

When replacing your bale spears, the corresponding bushings will need to be changed out as well. This bale bushing is a hardy sleeve that keeps hay forks in place whenever moving hay bales. This bushi…

Bale Spear Sleeve 5-11/16" Long 2" OD w/ 1" to 1.3/8" ID for 49664 & 49665 Spear

Aftermarket

When replacing your bale spears, the corresponding bushings will need to be changed out as well. This bale bushing is a hardy sleeve that keeps hay forks in place whenever moving hay bales. This bushi…

Rear Landside Replaces Plows After 1958 w/ (1) 7/16" Hole & (3) 5/8" Holes

wiese corporation

Landside,15′ 4 hole, ford part number: 981w 1/2′ thick heat treated high carbon steel bolt hole number and size : (1) 7/16′ (3) 5/8′, description : landside rear (after 1958),o…

TeeJet Real-view Camera w/ Mount Fits All Matrix GPS Units (20' Cable Included)

Teejet Technologies

20' cable included. The teejet real-view camera with mount can easily be mounted anywhere. With this camera, operators have the ability to see what is ahead, behind, and in hard-to-monitor imp…

100 of 792493K & NH1A Rake Teeth Kit Fits 256, 258, 259 & 260 Roto Bars

United Spring Company

One new aftermarket replacement set of 100 hay rake teeth / tines and 100 hold down clips, nuts & bolts made to fit rake models: 55, 56, 57, 256, 258, 259, 260.6.625" tine length3.875" coil to hoo…

TeeJet Tilt Gyro Module with POWER/CAN/DATA Cable For More Accurate Position

Teejet Technologies

Add tilt gyro module to matrix pro when operating in hilly or rolling terrain to ensure accurate and consistent position information. Corrects gps position errors caused by side slope conditions when…

TeeJet 20' Extension Cable for Real-View Camera Fits all Matrix GPS Units

Teejet Technologies

Teejet extension cable for real-view camera fits all matrix gps units

TeeJet RAM Mount Suction Cup For Matrix 570 GPS Systems

Teejet Technologies

Teejet ram mount suction cup for matrix 570 gps systems

TeeJet RAM Mount Suction Cup For Matrix 430 GPS Systems

Teejet Technologies

Teejet ram mount suction for matrix 430 gps systems

2 of 9-1/2" Cultipacker Wheel to Replace Broken & Worn Out Wheels

Unbranded

These 9-1/2"cultipacker wheels can replace broken or worn wheels on yourcultipacker. Constructed of sturdy cast iron, these notchedcultipacker wheels will help you get the firm seed …

9-1/2" Cultipacker Wheel to Replace Broken & Worn Out Wheels

Unbranded

These 9-1/2"cultipacker wheels can replace broken or worn wheels on your cultipacker. Constructed of sturdy cast iron, these notchedcultipacker wheels will help you get the firm seed bed y…

Teejet Matrix 908 with 8" Touch Screen, RXA-52 Antenna & Lighter Connection

Teejet Technologies

Expandable. Rugged. Easy to use. The teejetmatrix 908is an all new field computer with expandable options to appeal to any agricultural application. You can choose between navigation mode…

Replacement Linear Electric Twine Arm Wrap & Pickup Actuator For Agco, Hesston & New Idea Balers

Concentric International

Replacement linear electric twine arm wrap & pickup actuator for agco, hesston & new idea balers.Replaces: hesston: 514 & 814.New idea round baler: 483, 484, 485, 486, 4844, 4845, 4854, 48…

1-1/8" Square x 41-3/4" Long Gang Bolt Disc Axle

Aftermarket

Use this replacement axle to get your disc harrow back in operation. The disc axle is 1-1/8" square and 40-3/4" long. Constructed of heat treated steel. Right hand thread with nut. ga…

Teejet GD430 RXA-30 Replacement Antenna 20' Cable 45-05786

Teejet Technologies

45-05786, 20' antenna cable rxa-30 20ft cable

Plow Shin Oliver / White 219, 419, 619 Series 12", 14", 16" & 18" Bottom

Osmundson

Plow shin white / oliver 219, 419, 619 series 12", 14", 16" & 18" bottomfits:12", 14", 16" & 18" white/oliver series :219, 419 , 619 replaces :ep7490c, 33111602, 6522182, 2…

Teejet 20' Antenna for Matrix 430, Pro GS & Centerline 220 Model

Teejet Technologies

Gps rxa-30 antenna with 20' cable for centerline and matrix tractor gps guidance systems. Magnetic base for easy installation and portability. • compatible with l1 gps and wa…

Teejet 430 Matrix Kit w/ RXA-30 Antenna & 12V Lighter Power Cable USA Made

Teejet Technologies

The compact matrix 430 is an easy to use, low cost, graphical guidance system ideal for first-time users. The full-color, touchscreen display allows the operator to efficiently navigate fields with mi…

Teejet 430 Matrix Kit w/ RXA-30 Antenna & Power Battery Cable USA Made

Teejet Technologies

The compact matrix 430 is an easy to use, low cost, graphical guidance system ideal for first-time users. The full-color, touchscreen display allows the operator to efficiently navigate fields with mi…

Rib Share Fits John Deere Plows with 16" Bottoms One 1/2” x 1 3/8” & Three 7/16” x 1 1/4” clipped head OD-16-4 RIB

wiese corporation

Rib share fits john deere plows with 16" bottoms bolts used : one 1/2” x 1 3/8” & three 7/16” x 1 1/4” clipped head replaces :a10227,a10023a, a10024a, a10027a, a100…