Pulley

3.5" Pulley w/ 5/8" Bore, for A-Belts

cast pulley for "a" belts, 3" od w/ 5/8" bore cast pulleytompak40-a

Pulley 16" OD Weld-A-Pulley used with 1/2" & 5/8" Belts (Hub sold separately)

Concentric International

16" od use's w-series hubv-pulleys - a (.50 w") & b (.66" w) groove for v hub

Pulley 6" OD, Weld-A-Pulley used with 1/2" & 5/8" Belts (Hub sold separately)

Concentric International

6" od use's w-series hubv-pulleys - a (.50 w") & b (.66" w) groove for v hub note: it is recommended to weld 4-1/2’’ diameter and under weldapulleys® on both sides. We recommend u…

Pulley 5-1/2" OD, Weld-A-Pulley used with 1/2" & 5/8" Belts(Hub sold separately)

Concentric International

5-1/2" od use's w-series hubv-pulleys - a (.50 w") & b (.66" w) groove for v hub note: it is recommended to weld 4-1/2’’ diameter and under weldapulleys® on both sides. We recomme…

Pulley 4.5" OD, Weld-A-Pulley used with 1/2" & 5/8" Belts (Hub sold separately)

Concentric International

4-1/2" od use's w-series hubv-pulleys - a (.50 w") & b (.66" w) groove for v hub note: it is recommended to weld 4-1/2’’ diameter and under weldapulleys® on both sides. We recomme…

Pulley 4" OD, W-Series Hub, Weld-A-Pulley used with 1/2" & 5/8" Belts

Concentric International

4" od use's w-series hubv-pulleys - a (.50 w") & b (.66" w) groove for v hub note: it is recommended to weld 4-1/2’’ diameter and under weldapulleys® on both sides. We recommend u…

4" x 5/8" Idler Pulley Bearing installed fits Bush Hog TM4, TM5, TM6 & more. Replaces,12661

Weasler

spec.Imperialmetric length 1.33 inches 34 mm outside diameter 4.59 inches 117 mm shipping dimensions 1.33" l × 4.59" h × 0.92" w …