FREE SHIPPING on orders over $150.00

Osmundson

Compare Add to Cart

Ford Plow Shin 12",14",16" & 18" Plow Shin High Carbon Steel

Osmundson

Ford plow shin 12",14",16" & 18" plow shin high carbon steel general purpose, clay, sod, & stubble replaces : wfd3s, f-shin, 686-s201344,

MSRP:

Was:

Now: $44.95

F SHIN
Add to Cart
Compare Add to Cart

Plow Share Fits John Deere Plows with 18" Bottoms 3 Hole Metric Three 16mm x 40mm clipped head

Osmundson

Plow share fits john deere plows with 18" bottoms 3 hole bolts used :three 16mm x 40mm clipped head replaces john deere no : a30951 , a42408

MSRP:

Was:

Now: $62.95

ODM-18-3-RS
Add to Cart
Compare Add to Cart

Plow Shin Fits Allis Chalmers 14", 16" & 18" Bottom 375 Series

Osmundson

This plow shin will fit a-c moldboard plows with allis chalmers 375 moldboard plow bottoms. These moldboard bottoms are usually found on a-c 60, 70, 80, and 9000 series moldboard plows. Replaces...

MSRP:

Was:

Now: $38.95

WAC12
Add to Cart
Compare Add to Cart

Plow Shin Fits Allis Chalmers 14", 16" & 18" Bottom 387 Series

Osmundson

Plow shin fits allis chalmers 14", 16" & 18" bottom 387 series this plow shin will fit a-c moldboard plows with allis chalmers 387 moldboard plow bottoms. Replaces allis chalmers..…

MSRP:

Was:

Now: $46.95

WAC13
Add to Cart
Compare Add to Cart

Plow Shin Fits IHC Super Chief 14", 16" & 18" Bottom

Osmundson

Plow shin fits super chief 14", 16" & 18" bottom fits: 14", 16" & 18" replaces : w125 ,132001ch ,522325 ,488266 ,179320a1, ih-shin

MSRP:

Was:

Now: $43.95

IH SHIN
Add to Cart
Compare Add to Cart

Plow Shin fits John Deere HS-314 Moldboard Plow 14" Bottom

Osmundson

14 inch john deere moldboard plows bolts used : two 7/16" replaces:a14700, wd5, d-shin-14, 8196aa,hs314, 324, 354, 434, 444, 534 & 544 please check measurements before ordering...

MSRP:

Was:

Now: $41.95

D SHIN-14
Add to Cart
Compare Add to Cart

Plow Shin Fits John Deere Moldboard Plow HS-316 with 16" Bottom

Osmundson

16" inch john deere shin for moldboard plows to fit:hs316, 326, 356, 436, 446, 536, 546 & sd546 replaces : a14702 please check measurements before ordering to ensure correct fit.

MSRP:

Was:

Now: $47.95

D SHIN-16
Add to Cart
Compare Add to Cart

Plow Shin Fits John Deere NU Series 16" & 18" Bottom

Osmundson

Plow shin fits john deere nu series 16" & 18" bottom fits:nu1036,nu1046, nu1048 replaces : a15594

MSRP:

Was:

Now: $45.95

D-NU-SHIN
Add to Cart
Compare Add to Cart

Plow Shin Massey Ferguson N-Heavy Duty 12",14",16" & 18" Bottom

Osmundson

Plow shin massey ferguson n-heavy duty 12",14",16" & 18" bottom fits:12", 14", 16" & 18" replaces : 660020m1,660008m1,mf-shin, wmfs,

MSRP:

Was:

Now: $47.95

MF SHIN
Add to Cart
Compare Add to Cart

Plow Shin Oliver / White 219, 419, 619 Series 12", 14", 16" & 18" Bottom

Osmundson

Plow shin white / oliver 219, 419, 619 series 12", 14", 16" & 18" bottomfits:12", 14", 16" & 18" white/oliver series :219, 419 , 619 replaces :ep7490c, 33111602, 6522182,..…

MSRP:

Was:

Now: $47.95

O SHIN W
Add to Cart
Compare Add to Cart

Spring Tooth Cultivator Point 2" Wide x 11" Long w/ 1" to 2" Hole Spacing

Osmundson

Oil quenched and heat treated. Plated and sharpened for better performance. Made from sturdy 5/16" flat stock for long life dependability. These cultivator points are punched with a hole and a slot...

MSRP:

Was:

Now: $16.95

211716114
Add to Cart
Compare Add to Cart

Spring Tooth Cultivator Point 2" Wide x 11" Long with 1" to 2" Hole Spacing

Osmundson

Oil quenched and heat treated. Plated and sharpened for better performance. Made from sturdy 5/16" flat stock for long life dependability. These cultivator points are punched with a hole and a slot...

MSRP:

Was:

Now: $15.95

211-D
Add to Cart
Compare Add to Cart

Spring Tooth Cultivator Point 2-1/2" Wide x 11" Long w/ 1" to 2" Hole Spacing

Osmundson

Oil quenched and heat treated. Plated and sharpened for better performance. Made from sturdy 5/16" flat stock for long life dependability. These cultivator points are punched with a hole and a...

MSRP:

Was:

Now: $19.95

210A
Add to Cart
Compare Add to Cart

Twisted Chisel Left Twist 2.25" - 2.50" Centers 3" x 1/2" x 22"

Osmundson

3" left twisted chisel plow point. 1/2" bolt holes on 2-1/4" - 2-1/2" centers. Uses 3" x 1/2" bolts

MSRP:

Was:

Now: $40.95

123HL
Add to Cart
Compare Add to Cart

Twisted Chisel Slash Point Left Hand 4" x 1/2" x 26"

Osmundson

4" wide left hand slash point1/2" thick, 26" long, 2-1/4" to 2-1/2" c-c bolt holes, uses 1/2" plow bolts interchange cc1245l sos02 occ124l5 cc124l5

MSRP:

Was:

Now: $48.95

OCC124L5
Add to Cart
Compare Add to Cart

Twisted Chisel Slash Point Right Hand 4" x 1/2" x 26"

Osmundson

4" wide right hand slash point1/2" thick, 26" long, 2-1/4" to 2-1/2" c-c bolt holes, uses 1/2" plow bolts interchange cc1245l sos02 occ124l5 cc124l5

MSRP:

Was:

Now: $47.95

OCC124R5
Add to Cart
Compare Add to Cart

Twisted Chisel Soil Saver Moldboard LH 26" x 4" x 1/2"

Osmundson

soil saver moldboards & points for chisel plowstwisted chisel for chisel plowslh twistdimensions: 1/2" x 4" x 22"5-holes, 1/2" on 2-1/4" centersfits: glencoe, brillion, landoll, bush hog,.…

MSRP:

Was:

Now: $42.95

OS-SSML
Add to Cart
Compare Add to Cart

Twisted Chisel Soil Saver Moldboard RH 26" x 4" x 1/2"

Osmundson

soil saver moldboards & points for chisel plowstwisted chisel for chisel plowslh twistdimensions: 1/2" x 4" x 22"5-holes, 1/2" on 2-1/4" centersfits: glencoe, brillion, landoll, bush hog,.…

MSRP:

Was:

Now: $42.95

OS-SSMR
Add to Cart

Osmundson

Ford Plow Shin 12",14",16" & 18" Plow Shin High Carbon Steel

Plow Share Fits John Deere Plows with 18" Bottoms 3 Hole Metric Three 16mm x 40mm clipped head

Plow Shin Fits Allis Chalmers 14", 16" & 18" Bottom 375 Series

Plow Shin Fits Allis Chalmers 14", 16" & 18" Bottom 387 Series

Plow Shin Fits IHC Super Chief 14", 16" & 18" Bottom

Plow Shin fits John Deere HS-314 Moldboard Plow 14" Bottom

Plow Shin Fits John Deere Moldboard Plow HS-316 with 16" Bottom

Plow Shin Fits John Deere NU Series 16" & 18" Bottom

Plow Shin Massey Ferguson N-Heavy Duty 12",14",16" & 18" Bottom

Plow Shin Oliver / White 219, 419, 619 Series 12", 14", 16" & 18" Bottom

Spring Tooth Cultivator Point 2" Wide x 11" Long w/ 1" to 2" Hole Spacing

Spring Tooth Cultivator Point 2" Wide x 11" Long with 1" to 2" Hole Spacing

Spring Tooth Cultivator Point 2-1/2" Wide x 11" Long w/ 1" to 2" Hole Spacing

Twisted Chisel Left Twist 2.25" - 2.50" Centers 3" x 1/2" x 22"

Twisted Chisel Slash Point Left Hand 4" x 1/2" x 26"

Twisted Chisel Slash Point Right Hand 4" x 1/2" x 26"

Twisted Chisel Soil Saver Moldboard LH 26" x 4" x 1/2"

Twisted Chisel Soil Saver Moldboard RH 26" x 4" x 1/2"

Subscribe for Deals & Product Updates

Request a Quote for .