Description
An accurate way to determine which series of PTO you have is to take two measurements of the cross and bearing kit on the tractor-end. Using calipers, first measure the outside diameters of the u-joint caps, which would be the same as measuring the inside holes of the yoke ears.
Secondly, measure the u-joint end-to-end both ways. Match these measurements using a cross and bearing identification chart and the remaining PTO parts needed for the complete driveline can be determined with ease.
| Spec. | Imperial | Metric |
|---|---|---|
| Bore 1 | 2.00 inches | 51 mm |
| Bore 1 | 51 MM STAR | |
| Connection 1 | ROLL PIN | |
| Height | 3.55 inches | 90 mm |
| HP@1000RPM | 119 HP | 89 kilowatts |
| HP@540RPM | 77 HP | 57 kilowatts |
| Length | 3.66 inches | 93 mm |
| Shipping Dimensions | 5.661" L × 3.55" H × 3.3" W | 14cm L × 9cm H × 8cm W |
| Shipping Volume | 66.32 in3 | 1087 cm3 |
| Shipping Weight | 3.00 pounds | 1 kilograms |
| Weight | 3.00 pounds | 1 kilograms |
| Width | 3.30 inches | 84 mm |
