Tail Wheels and Parts

Tail Wheel Fork Yoke 1.25" Shaft with 1" Axle Hole & 7" Usable Length

Tail wheel yoke 1-1/4" shaft w/ 1" axle holes 5-3/8" inside diameter9/16" pin hole

3/4”-10 x 7-1/2” Axle Bolt For Tail Wheel comes with Lock Nut ( used w/ Fabricated Hub )

3/4”-10 x 7-1/2” axle bolt for tail wheel comes with lock nut ( used w/ fabricated hub )

Flexible Coupling Disc For Rotary Cutter 6-5/16" OD x 5/8" Thick w/ 7/8 Bolt Holes

Farmer Bob's Parts

replaces servis / rhino 762215

Flexible Coupling Disc For Rotary Cutter 6" OD x 2-1/4" ID w/ 5/8 Bolt Holes

Farmer Bob's Parts

flexible coupling disc for rotary cutter 6" od x 2-1/4" id w/ 5/8 bolt holes. Fit's bush hog 1815, 1646, 109, 1109, 1209, 126, 1126, 1226, 310, 1310, 315, 1315.

Tail Wheel Hub Fabricated Steel with 1" Spindle Bushings

Aftermarket

Tail wheel hub fabricated steel with 1" spindle bushings specificationsfabricated hub with bushings to fit 1" axlehub width: 4-7/8"(4) 1/2" x 5" bolt patternbolt holes: 1/2"

3/4" Tail Wheel Bushing for Axle Bolt (Used w/ Hub 63813BH)

tail wheel bushing 3/4" id

1" Tail Wheel Bushing for Axle Bolt (Used w/ Hub 63813BH)

tail wheel bushing 1" id

Tail Wheel Bearing Kit used w/ Cast Hub that takes 1" Axle

Tail wheel bearing kit used on cast hub and 1" in axle bolt bearing kit includes : 2 x l44643 - bearing 2 x l44610 - bearing cup 2 x cr12407 : seal one brand new…

1" x 7.5" Axle Bolt For Tail Wheel comes with Lock Nut

1" -8 x 7.5" tail wheell axle bolt fit bush hog models:104, 105, 1050, 1051, 109, 1109, 1126, 12, 1209, 1226, 126, 1307, 1405, 1406, 266, 305, 306, 307, 405, 405hr, 406, 406hr, 502, 600

Tail Wheel Hub Cast Iron Complete fit's 1" Axles

Tail wheel hub cast iron complete fit's 1" axles specifications this kit replaces formerly used #40246 - tailwheel hub kitfits 1 in. Axlebolt holes: 1/2 in. (four holes)4-1/2 in. Hub width5 in. …

Tail Wheel Hub Fabricated Steel with 3/4" Spindle Bushings

Aftermarket

This replacement fabricated tail wheel hub assembly contains bushings to fit a 3/4 in. Axle. This hub assembly contains lock washers, nuts and a grease zerk. Fits the tailwheels of several brands of r…

Tail Wheel Fork Yoke 1.25" Shaft w/ 0.75" Axle Hole & 4.25" Usable Length

tail wheel fork for 3/4" axle & 1-1/4" shank. Fits many rotary cutters

Tail Wheel Fork Yoke 1.50" Shaft w/ 1" Axle Hole & 4.25" Usable Shaft Length

tail wheel fork with 1-1/2" shaft w/ 4-1/2" usable length & 1" hole for axle. The forks are 3/8" thick. The base at the end of the shaft is 1/2" thick.

Tail Wheel Fork Yoke 1 1/4 " Shaft w/ 1" Axle Hole & 4.50" Usable Length

tail wheel yoke 1-1/4" shaft w/ 1" axle hole fits many rotary cutters

Tail Wheel 6" x 9" Fits Many Rotary Cutters & Bat Wing Implement Tractors

Farmer Bob's Parts

Let your rotary mower continue running smoothly. New rotary mower tires that are not worn out can help improve maneuvering capabilities. This laminated tire is sized at 4.00 x 8 with a bolt pattern of…

Tail Wheel Assembly Fits 1-1/2" Shank with 4.5 Usable Shaft Length

Aftermarket

Tail wheel fork yoke 1.1/2" shaft w/ 1" axle hole & 4.50" usable length.4" x 8" tail wheel 15" segmented tire on 4 hole x 5" bolt circle x 3-5/8" pilot. Will fit most rotary cutters. 1" diameter …

Tail Wheel Assembly Fits 1-1/4" Shank with 4.5 Usable Shaft

Aftermarket

Tail wheel fork yoke 1.25" shaft w/ 1" axle hole & 4.50" usable length.4" x 8" tail wheel 15" segmented tire on 4 hole x 5" bolt circle x 3-5/8" pilot. Will fit most rotary cutters. 1" diameter b…