Description
The High Performance Pump. 100 PSI (6.9 BAR) at 40 GPM (151 LPM) due to increased pulley ratio and larger 1-1/2" x 1-1/4" construction.
Provides higher pressure and greater volume for applications with large tanks and long spray booms.
Allows fuel savings by operating at lower engine speeds while maintaining adequate spraying pressures.
Port sizes: Inlet 1-1/2" NPT, Outlet 1-1/4" NPT
Max Pressure: 100 PSI
Max Flow: 100 GPM
Weight: 45 lbs
PTOC-150-600-6SP
Suction 1-1/2" Female Pipe Thread
Discharge 1-1/4" Female Pipe Thread
Chemical Resistant Valox Impleller
Standard Viton Carbon/Ceramic Mechanical Seal
Spring loaded idler absorbs shock of PTO engagement
New BAC-15-PIN feature ensures proper alignment
Maximum Gallons Per Minute - 100 GPM
Maximum PSI - 110 PSI
Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period.
Do Not Run With Flow Shutoff For Extended Periods - Running the pump with no flow for extended periods of time will result in damage.
