Description
Finally...an economical modular flow indicator you can match to your specific requirements.
Easy to see, visual indicator of liquid flow. If one of the "float balls" is lower than the others, there is a blockage.
Individual columns clip together so you can gang as many or as few columns as you need.
Exclusive O-ring seal and joint clip system is easy to assemble and service.
Can monitor up to three spray tips per column.
Range of "float balls" lets you match to your flow rate.
3/8" & 3/4" inlet and/or outlet fittings.
100 PSI maximum operating pressure.
UV protected material stays clear.
VISUAL BALL FLOW INDICATORS LET YOU IDENTIFY ANY PLUGS OR LEAKS SO YOU CAN RESOLVE THEM IMMEDIATELY.
3/8 90º Outlets & 3/4" Stright Inlets
VISUAL BALL FLOW MANIFOLD COLUMNS ARE INFINITELY STACKABLE, SO THEY CAN BE BUILT INTO ANY REQUIRED CONFIGURATION.
MANIFOLD FLOW INDICATORS COME IN THREE DIFFERENT COLUMNS SIZES, BROKEN DOWN BY RECOMMENDED FLOW RANGES:
- ULTRA LOW FLOW COLUMN: 0.01 – 0.24 US GPM FLOW RATES
- LOW FLOW COLUMN: 0.05 – 0.65 US GPM FLOW RATES
- STANDARD FLOW COLUMN: 0.07 – 2.70 US GPM FLOW RATE
THE ISOLATED FEED COLUMNS ARE USED TO MONITOR MULTIPLE SINGLE FEED LINES. FOR EXAMPLE, MONITORING INDIVIDUAL LINES COMING OUT OF A SQUEEZE PUMP.
ISOLATED FEED FLOW INDICATORS COME IN TWO DIFFERENT COLUMNS SIZES, BROKEN DOWN BY RECOMMENDED FLOW RANGES:
- LOW FLOW COLUMN: 0.05 – 0.65 US GPM FLOW RATES
- STANDARD FLOW COLUMN: 0.07 – 2.70 US GPM FLOW RATES
O-RING SEAL (ORS) TO ORS
AN ORS MALE INLET WITH AN ORS FEMALE PORT, ALLOWING FOR AN ORS METERING ORIFICE AND ORS FITTING TO COMPLETE A MANIFOLD ASSEMBLY.AN ORS MALE INLET WITH A RADIALOCK CAP OUTLET (SEE WILGER PRICELIST FOR OPTIONS), USE WITH METERING ORIFICE (#40285-XX SERIES) TO COMPLETE A MANIFOLD ASSEMBLY.
