Description
Banjo PP Bolted Ball Valve - 6-bolt Full port
Precision Molded in Polypropylene - reinforced with fiberglass for additional strength
Sizes 1/2" thru 4" with FKM seals.
304 Stainless Steel Bolts and nuts
Self-aligning ball moves freely against the PTFE seats for smooth operation.
The valve opens or closes with very little pressure on the handle.
Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.
Precision molded in polypropylene. Polypropylene is reinforced with fiberglass for additional strength.
Self-aligning ball moves freely against the PTFE seats for smooth operation. The valve opens and closes with very little pressure on the handle.
Ball is diamond turned after molding to make it spherically perfect, which provides the right contact between ball and seats.
Viton "O" ring stem seal.
Teflon® self-lubricating stem bushings and seats cannot stick or rust.
Stainless steel nuts and bolts are used to insure easy disassembly in corrosive conditions.
Maximum operating pressure 100 P.S.I.
Sizes 1/2" thru 2" have a four bolt construction. 2" full port, and 3" full port have six bolt construction. All have Viton O-Rings and PTFE seats as a standard.
Lightweight hose end valve for convenient transfer of liquids. Angle and flange with 8" long polypropylene fill spout. Same features as straight through valve.
