Description
The High Performance Pump. 100 PSI (6.9 BAR) at 40 GPM (151 LPM) due to increased pulley ratio and larger 1-1/2" x 1-1/4" construction.
Provides higher pressure and greater volume for applications with large tanks and long spray booms.
Allows fuel savings by operating at lower engine speeds while maintaining adequate spraying pressures.
20 spline 1-3/4" (44.5 MM) split bore shaft with locking collar for larger 1000 RPM PTO Models.
Max Pressure: 100 PSI
Max Flow: 100 GPM
Weight: 45 lbs
PTOC-150-1000-20SP
Suction 1-1/2" Female Pipe Thread
Discharge 1-1/4" Female Pipe Thread
Chemical Resistant Valox Impleller
Standard Viton Carbon/Ceramic Mechanical Seal
Spring loaded idler absorbs shock of PTO engagement
New BAC-15-PIN feature ensures proper alignment
Cast iron centrifugal for direct mount on 20 spline, 1-3/4", 1000 RPM PTO Shaft
Maximum Gallons Per Minute - 100 GPM
Maximum PSI - 110 PSI
